产品概述：

本产品使用全塑外壳而开发的全密封机构，因使用环境对产品可靠性的影响，如凝露、沿海腐蚀环境等对电镀件、电气元件的性能影且体积小，功能齐响很大，严重降低产品使用周期，经常需要去维护保养，对智能化自动化的推广起到制约作用。所以一款能防水，全，经济型比较高的机构来达到防凝露、防水、防腐蚀功能要求的操动机构，即防护等级要求IP65。
本产品通过外壳与底板将机构封装在里面，机构高度控制在260mm以下，操作、指示、按钮等通过密封圈伸出外壳，电气元件等通过航空插座将点位引出，以此来达到IP65密封要求。特殊处理后可做到IP67密封要求，适用于防凝露、防腐蚀等特殊环境场合使用。

The fully sealed mechanism developed by this product using an all-plastic shell is due to the impact of the use environment on the reliability of the product, such as condensation, coastal corrosion environment, etc. on the performance of electroplating parts and electrical components and small size, the function is very large, seriously reduce the product use cycle, often need to be maintained, and play a restrictive role in the promotion of intelligent automation. Therefore, an operating mechanism that can be waterproof, full, and economical to meet the requirements of anti-condensation, waterproof and anti-corrosion functions, that is, the protection level requires IP65.
This product encapsulates the mechanism through the shell and the bottom plate, the height of the mechanism is controlled below 260mm, the operation, indication, buttons, etc. extend out of the shell through the sealing ring, and the electrical components lead out the point through the aviation socket, so as to meet the IP65 sealing requirements. After special treatment, it can achieve IP67 sealing requirements, and is suitable for use in special environmental occasions such as anti-condensation and anti-corrosion.

技术参数：

V机构输出角度:约87°V Mechanism output angle:approximately 87°
合闸平均速度 :0.6±0.2Average closing speed:0.6±0.2
分闸平均速度 :1.1±0.2 Average speed ofopening: 1.1±0.2
合闸时间 :20~60ms Closing time:20~60ms
分闸时间:18~45ms Opening time:18~45ms
分合闸不同期:≤2ms Different periods of opening and closing:≤ 2ms
弹跳:≤2ms Bounce:≤2ms
反弹:≤2mm Bounce: ≤2mm
机械寿命:≥10000次 Mechanicallife:≥10000 cycles

订货型号：

CT□-70DAJQX36 电动断路器全密封机构

CT□-30DJQX33 电动进线全密封机构

CT□-30SGQX33  手动隔离全密封机构